SEARCH WHAT YOU WANT
Nuts
Carbon Steel Heavy Hex Nut
Heavy hex nuts in carbon steel, heat-treated to property classes 8, 10, and 12 under ISO 898-2. The increased width across flats and greater thickness compared to standard nuts raise proof load values, matching bolt tensile requirements up to class 12.9.
Heavy hex nuts in carbon steel, heat-treated to property classes 8, 10, and 12 under ISO 898-2. The increased width across flats and greater thickness compared to standard nuts raise proof load values, matching bolt tensile requirements up to class 12.9.
Previous: En14399-3 Grade 10 Black Hex Nut with Hr
Product Details
Product Introduction
Heavy hex nuts in carbon steel, heat-treated to property classes 8, 10, and 12 under ISO 898-2. The increased width across flats and greater thickness compared to standard nuts raise proof load values, matching bolt tensile requirements up to class 12.9.
Material & Mechanical Properties
Forged from medium carbon steel; quenched and tempered per grade. Proof stress and hardness values are verified by lot with available mill test reports (MTRs).
Class 8: Compatible with class 8.8 bolts.
Class 10: Proof load aligns with class 10.9 bolt ultimate strength.
Class 12: Service-rated for class 12.9 high-tensile assemblies.
Dimensional Specifications
Conform to ASME B18.2.2 heavy hex and ISO 4033 thickness series. Coarse metric thread to ISO 724 as standard; fine thread series optional. The wider bearing face distributes clamp load and limits embedding in structural steel plates.
Surface Protection
Plain oiled, zinc electroplated (ASTM B633 Fe/Zn 5–8 μm), or hot-dip galvanized (ASTM A153). Galvanized nuts are supplied with overtapped threads to accommodate bolt coating allowance without assembly interference.
Assembly & Torque Control
Installation requires a calibrated torque wrench and controlled preload, following established torque-reference values for the bolt’s property class and surface condition. Coarse pitch and heavy hex geometry reduce stripping risk and permit higher installation torque before thread yield.
Application Suitability
Structural steel connections to EN 14399, bridge and building steelwork, heavy machinery mounting, high-stress automotive chassis joints, and other bolted assemblies where proof-load matched nut performance is specified.
Product Introduction
Heavy hex nuts in carbon steel, heat-treated to property classes 8, 10, and 12 under ISO 898-2. The increased width across flats and greater thickness compared to standard nuts raise proof load values, matching bolt tensile requirements up to class 12.9.
Material & Mechanical Properties
Forged from medium carbon steel; quenched and tempered per grade. Proof stress and hardness values are verified by lot with available mill test reports (MTRs).
Class 8: Compatible with class 8.8 bolts.
Class 10: Proof load aligns with class 10.9 bolt ultimate strength.
Class 12: Service-rated for class 12.9 high-tensile assemblies.
Dimensional Specifications
Conform to ASME B18.2.2 heavy hex and ISO 4033 thickness series. Coarse metric thread to ISO 724 as standard; fine thread series optional. The wider bearing face distributes clamp load and limits embedding in structural steel plates.
Surface Protection
Plain oiled, zinc electroplated (ASTM B633 Fe/Zn 5–8 μm), or hot-dip galvanized (ASTM A153). Galvanized nuts are supplied with overtapped threads to accommodate bolt coating allowance without assembly interference.
Assembly & Torque Control
Installation requires a calibrated torque wrench and controlled preload, following established torque-reference values for the bolt’s property class and surface condition. Coarse pitch and heavy hex geometry reduce stripping risk and permit higher installation torque before thread yield.
Application Suitability
Structural steel connections to EN 14399, bridge and building steelwork, heavy machinery mounting, high-stress automotive chassis joints, and other bolted assemblies where proof-load matched nut performance is specified.
FAQ
1. How do you let me trust you.
Jiaxing City Qunbang Hardware Co.,ltd hs its own right of import and export,QBH trademark in China,United States,European Union have been registered.At the same time,you can also check the registration information of our company in the China industry and Commerce system.
2. How about your price.
We will be based on different markets,for different quality and quantity,tailor-made prices for customers,in order to achieve win-win goal.
3. How do you control your quality.
Incoming quality contral( IQC)→Process Quality control(PQC)→Output quality control(OQC),and the random samples is sent to TUV for testing.If the customer received the goods and found quality problems,QBH company promises to be responsible for returning money or replenishing the goods
4. Could you provide free samples?
For new customer, We can provide free samples for standard fastener, But the clients will pay the express
charges. For old customer, We will send you free samples and pay express charges by ourself.
5. What is your packing.
Usually 25KG/carbon,36CTNS on the pallets,or 20-30kg/Bags,then on the pallet,QBH company personalized packagingis also available,like 10PCS/plastic bag or 10pcs/box,it can print some information
such as LOGO and pattern of customers.
6. What is your payment term
Normally,our terms of payment are TT and L/C,if we cooperate for a long time,we can reach the point of mutual trust,and fully support our customers to become bigger and stronger in the local market.Not only in the price concessions,but also in the payment can also be made on credit,Specific credit sales time needs to be negotiated separately.
Related Products
DIN934 Carbon Steel Hex Cap Nut-
DIN934 Carbon Steel Hex Cap Nut
DIN934 Carbon Steel Hex Cap Nut play the role of a component of all manufacturing machinery.DIN934 Carbon Steel Hex Cap Nut can fastener other components. DIN934 Carbon Steel Hex Cap Nut have kinds of nut. We have common national standard, German sta...
DIN6923 Flange Head Nut-
DIN6923 Flange Head Nut
DIN6923 Flange Head Nut provide a secure and tight fit, while also preventing the nut from loosening due to vibration. This is especially important in industries where machinery and other heavy equipment are used, as any loosening of fittings can cau...
Carbon Steel Hex Flange bolt-
Carbon Steel Hex Flange bolt
Carbon Steel Hex Flange bolt provide a secure and tight fit, while also preventing the nut from loosening due to vibration. This is especially important in industries where machinery and other heavy equipment are used, as any loosening of fittings ca...
DIN6923 Zinc Plating Hex Flange Nut-
DIN6923 Zinc Plating Hex Flange Nut
DIN6923 Zinc Plating Hex Flange Nut provide a secure and tight fit, while also preventing the nut from loosening due to vibration. This is especially important in industries where machinery and other heavy equipment are used, as any loosening of fitt...
ISO 4033 Carbon Steel Hex Nuts Classes 8, Black Oxide Finish-
ISO 4033 Carbon Steel Hex Nuts Classes 8, Black Oxide Finish
QBH ISO 4033 Carbon Steel Hex Nuts are manufactured to ISO 4033:2023, featuring a high-profile hexagonal design for reliable threaded connections. Made from carbon steel with Property Class 8 mechanical performance, these nuts are available with a bl...
DIN 6915 Carbon Steel Heavy Hex Nuts Classes 10, Black Oxide Finish-
DIN 6915 Carbon Steel Heavy Hex Nuts Classes 10, Black Oxide Finish
DIN 6915 Heavy Hex Nuts are designed for high-strength fastening applications and are commonly used in structural steel connections. Featuring a thick body, a wider across-flats dimension, and a larger bearing surface, they provide reliable clamping ...
DIN 555 Hexagon Nuts-
DIN 555 Hexagon Nuts
DIN 555 hexagon nuts are German‑standard metric fasteners of product grade C. Made of high‑quality carbon steel, they cover a complete metric range from M5 to M100. Multiple mechanical classes and optional surface treatments are available, ideal for ...
BS 1083 Hexagon Nuts-
BS 1083 Hexagon Nuts
BS 1083 hexagon nuts are classic British‑standard fasteners with BSW / BSF imperial threads. Manufactured from premium carbon steel, they are available in multiple sizes ranging from 1/4 inch to 2 inch. Different surface treatments including black ox...
AS 1112 Hexagon Nuts-
AS 1112 Hexagon Nuts
AS 1112 hexagon nuts are standard metric fasteners compliant with Australian standard specifications. Manufactured from high-quality carbon steel, they are available in Class 4, Class 5, Class 8 and Class 10 strength grades. Multiple surface treatmen...
DIN557 Carbon Steel Square Nut-
DIN557 Carbon Steel Square Nut
DIN 557 carbon steel square nut – metric square nut with chamfered corners and flat bearing surface, thread sizes M3–M24 (coarse pitch per ISO 261). Material: carbon steel per ISO 898-2, property classes 4, 6, 8, 10 (proof stress values: 350 MPa for ...
DIN982 Hexagonal Nylon Insert Lock Nut-
DIN982 Hexagonal Nylon Insert Lock Nut
DIN 982 hexagon nylon insert lock nut – prevailing torque type high nut (Type P) with non-metallic insert , thread sizes M5–M24 . Locking mechanism: nylon ring inner diameter undersized relative to thread pitch diameter, deformed upon bolt insertion ...
DIN934 Carbon Steel Hex Cap Nut-
DIN934 Carbon Steel Hex Cap Nut
DIN934 Carbon Steel Hex Cap Nut play the role of a component of all manufacturing machinery.DIN934 Carbon Steel Hex Cap Nut can fastener other components. DIN934 Carbon Steel Hex Cap Nut have kinds of nut. We have common national standard, German sta...
DIN6923 Flange Head Nut-
DIN6923 Flange Head Nut
DIN6923 Flange Head Nut provide a secure and tight fit, while also preventing the nut from loosening due to vibration. This is especially important in industries where machinery and other heavy equipment are used, as any loosening of fittings can cau...
Carbon Steel Hex Flange bolt-
Carbon Steel Hex Flange bolt
Carbon Steel Hex Flange bolt provide a secure and tight fit, while also preventing the nut from loosening due to vibration. This is especially important in industries where machinery and other heavy equipment are used, as any loosening of fittings ca...
DIN6923 Zinc Plating Hex Flange Nut-
DIN6923 Zinc Plating Hex Flange Nut
DIN6923 Zinc Plating Hex Flange Nut provide a secure and tight fit, while also preventing the nut from loosening due to vibration. This is especially important in industries where machinery and other heavy equipment are used, as any loosening of fitt...
ISO 4033 Carbon Steel Hex Nuts Classes 8, Black Oxide Finish-
ISO 4033 Carbon Steel Hex Nuts Classes 8, Black Oxide Finish
QBH ISO 4033 Carbon Steel Hex Nuts are manufactured to ISO 4033:2023, featuring a high-profile hexagonal design for reliable threaded connections. Made from carbon steel with Property Class 8 mechanical performance, these nuts are available with a bl...
DIN 6915 Carbon Steel Heavy Hex Nuts Classes 10, Black Oxide Finish-
DIN 6915 Carbon Steel Heavy Hex Nuts Classes 10, Black Oxide Finish
DIN 6915 Heavy Hex Nuts are designed for high-strength fastening applications and are commonly used in structural steel connections. Featuring a thick body, a wider across-flats dimension, and a larger bearing surface, they provide reliable clamping ...
DIN 555 Hexagon Nuts-
DIN 555 Hexagon Nuts
DIN 555 hexagon nuts are German‑standard metric fasteners of product grade C. Made of high‑quality carbon steel, they cover a complete metric range from M5 to M100. Multiple mechanical classes and optional surface treatments are available, ideal for ...
BS 1083 Hexagon Nuts-
BS 1083 Hexagon Nuts
BS 1083 hexagon nuts are classic British‑standard fasteners with BSW / BSF imperial threads. Manufactured from premium carbon steel, they are available in multiple sizes ranging from 1/4 inch to 2 inch. Different surface treatments including black ox...
Get Your Free Sample Now
Submit this form and our sales representative will contact you soon.
